BITMAIN ANTMINER E3, Ethash
Note: This batch ships out within 10 days upon receipt of payment (first-order-first-paid.)
Note: Your order is only final after we confirmed it by sending the invoice.
Note: Order without VAT (0%) with a EU company VAT number or by ordering from outside EU
Note: The price of crypto mining machines must be adjusted frequently according to many factors, including Ethereum/USD exchange rate, the network difficulty, and expected difficulty increase. Refund requests based on price changes cannot be honored.
Note: Up to two years warranty instead of 180 days.
Hashing algorithm: Ethash
Power consumption: 800W
|Parameters of ANTMINER E3|
|2||Total quantity of hash chips||18 PCS|
|3||Total quantity of hash boards||3 PCS|
|4||Total hash rate||190 MH/s|
|5||DC voltage input||11.60~13.00 V|
|6||DC current input @12V DC input @25℃||58.9 A +4%|
|7||DC Power @12V DC input @25℃||707 W +4%|
|220VAC Power @25℃ ,93% conversion
efficiency of APW3++
760 W +4%
|220VAC Power efficiency @25℃ ,93%
conversion efficiency of APW3++
4 J/MH +4%
|10||Weight（without package）||10.5 kg|
|11||Operation temperature||0-40 ℃|
|12||Storage temperature||-40-85 ℃|
|15||Networking connection mode||Ethernet Cable|
|16||Power connection mode||All two PCI-E ports are required to power the board. You can use one PSU to power multiple boards,
but do not attempt to power one board with two PSUs.
We suggest to prevent the control board to be powered up before hash boards be powered up.
Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter.
PSU: There are 3 PCI-e connectors for +12V DC input on each hashing board and all 3 are required. Do not connect more than one PSU to the same hashing board!
We recommend the APW3++ power supply or the APW7 power supply for use with the Antminer E3. One power supply supports one Antminer E3.
Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. If you use different PSU for hash boards and control board, please make sure to power the hash boards first and the control board only after the hash boards have been powered.